Pacland's Philippine Boxing Forum

JACOBS CANADA JOB OPPORTUNITIES

Hello Friends / Colleagues,

Greetings from Calgary!

Just spoke to the Project Controls Manager of Jacobs Canada and learnedthat Jacobs Canada is looking for at least 30 candidates (within and outside Canada) to fill up vacant positions (AT LEAST 30 POSITIONS) within his Project Controls Department (Estimating, Costing, Planning/Scheduling). Jacob Canada will handle all the immigration matters to get the successful candidate on board and work here in Canada ASAP.

So, if you or your friends are dreaming of coming/migrating to Canada, I believe this is the quickest way to make that dream come true, thru God's grace.

Anyway, if you're interested, please e-mail the Manager below

MARTIN SLINGERLAND, MSc.
Project Controls Manager
Jacobs Canada Inc.
martin.slingerland@jacobs.com

By the way, the rate (to have an idea) for Lead positions - it will be around CAD$105 / hr. This rate is really not bad here in Canada. Work assignment will be here in Calgary.

SAUDI ARAMCO, KINGDOM OF SAUDI ARABIA

Below are job openings for JOB SKILLS TRAINERS and ACADEMIC TEACHERS for Saudi Aramco Training Center under Al Hoty Co. contract. Aramco will hold an interview workshop in UK (Sep 8-16), India (Sep 19-27), Philippines (Sep 30 - Oct 9. 2012). PLEASE SEND CV WITH THE APPROPRIATE COMPLETED FORM TO ahcjobs@al-hoty.com, fitz.quiroz@al-hoty.com, buddy_villas@yahoo.com.

Job Skills or Vocational Trainers

Classroom Instruction

Mechanical 18

PCST/Instr 8

HVAC 1

Electrical 2

Operation 20

Metal (welder) 1

Pipefitter 1

Total 51



Academic Teachers

Teacher (English) 20

Teacher (Math) 1

Physics 1

Total 22


POSITION REQUIREMENTS/EXPERIENCE

Adv. ITC Teacher (English)
REQUIREMENT:

· BA (preferably a Master’s degree) in TEFL/TESL or

· BA (preferably a Master’s degree) in English, Applied Linguistics or modern languages with a teaching certificate in CELTA /DELTA

· Minimum of 4 years full-time teaching English.

· Computer literacy is desirable

Adv. ITC Teacher (Math) REQUIREMENT:

· BS or MS degree in Math

· Minimum of 4 years full-time teaching Math in secondary schools and above

· Computer and graphing calculator literacy is desirable

Adv. ITC Teacher (Physics) REQUIREMENT:

· BS or MS degree in Physics

· Minimum of 4 years full-time teaching Physics in secondary schools and above

· Computer and scientific calculator literacy is desirable

Adv. ITC Teacher (Accounting) REQUIREMENT:

· BS or MS degree in Accounting

· Minimum of 4 years full-time teaching Accounting in secondary schools and above

· Computer and graphing calculator literacy is desirable

Operator Trainer
· 11 years’ experience as a qualified Supervising or Control board Operator for the Oil & Gas/ Petrochemical industry or BSc with minimum 4 years’ experience).

· Experienced in One or more of the following Processes: Crude Oil Distillation/fractionation, reactor/catalytic, cryogenic, hydro treating, GOSP, WIP, utilities Bulk plant, SSSP, AFO or tank farm operations. DCS experience Preferred.

Instrument Technician Trainer

[PCST]
· 11 years’ experience in Pneumatic, Electronic and Digital Instrumentation in Oil/Gas Industry or BSc with minimum 4 years’ experience).

· Experience should include PM of Field Devices (DVCs, Smart Transmitters, conventional Transmitters, Valves, Controllers and FF devices).

· Knowledge and experience on DCS (Yokogawa Centum, HoneywellTDC300, and Delta V) and PLC (Tricon, Siemens, and AB) is an advantage.

Electrical Trainer
· 4 Years’ experience as maintenance Engineer or 11 years’ experience as technician in Class 1, Division 1, Oil & Gas Petrochemical Plants.

· Able to troubleshoot and repair AC machines , able to maintain HV transformers, HV/LV switchgear, UPS systems and Motor operated valves , using electrical/ electronic, test equipment, schematics and one line diagrams.

· Maintain and troubleshoot HV breakers and transformers

· Basic operation / programming of PLC.

Mechanical Trainer
· 4 years’ experience as mechanical engineer or 11 years field experience as a mechanical maintenance technician in oil and gas or petrochemical industries.

· Experience in disassembly, inspection and repair of rotating equipment such as valves, pumps, gearboxes, Air or Gas compressors. Experience in operating lathe machines is preferred.

· Knowledge and experience in the following mechanical subjects: Bearings and Lubrication, Reverse LASER alignment, Vibration analysis, motor operated valve actuators, wet & dry gas Mechanical seals, and Turbines.

Welding Trainer
· 11 Years’ experience as a welder working in oil & gas/petrochemical industry Candidate should have served minimum 3 years apprenticeship or approved CITB training

· Candidate should have hands on experience of SMAW GTAW method, welding of structural steelwork and Pipe welding of carbon steel, using both E-6010 and E-7018 electrodes for open root, fill, and cap, plate sizes up to ¾ inch thickness and pipe sizes from 1 inch up to 8 inch schedule 40 – schedule 140 pipe or BSc with minimum 4 years’ experience).

· Must have valid pipe welder certification

Pipefitter / fabricator Trainer
· 11 Years’ experience as a pipefitter fabricator in the oil & gas/petrochemical industry, Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years’ experience).

· Perform Hydrostatic testing of pipe spools. Knowledge of rigging equipment and procedures helpful.

· Should be proficient in the fabrication of both threaded/ welded pipework spools and have a good working knowledge of both oxyacet cutting and arc welding.

HVAC Trainer
· A mechanical engineer (Either BSc with minimum of 4 years or H. School with 11 years), in the field of HVAC servicing and maintenance.

· Preferred a master degree holder with specialization in Heating, ventilation and Air-Conditioning (HVAC).

· Experience in preventive maintenance (PM) of heating, ventilating and air-conditioning systems (HVAC, air-handling units, boilers, cooling towers, circulation pumps and control systems, HVAC Direct digital Controls (DDC) and building management systems (BMS).


Below new requirements are for Saudi Aramco PMT Department. Aramco will interview shortlisted candidates either by phone, video conference or personal if they are close to Dhahran, Saudi Arabia. All applicants must be available for mobilization within 3 months of accepting the offer.

Candidates must have BS Degree, min 3 years related experience in construction, oil/gas, petrochemical or plant industries OR min 10 years experience if non-degreed.

Other qualification level:
Level I (Engineers, Scheduler, Construction, etc) = BS Degree with 9 years related experience
Level II (Engineers, Scheduler, Cost, etc) = BS Degree, min 7 years related experience
Level III (Engineers, Cost) BS Degree, min 5 years related experience
Level IV (Engineer, Cost, Scheduler) BS Degree, min 3 years related experience

Job Title/Position Discipline
Accountant I Costing/Forecasting
Accountant I Costing/Forecasting
Accountant I Costing/Forecasting
Asst Engineer I Quantity Surveyor
Asst Engineer I Quantity Surveyor
Asst Engineer I Material
Asst Engineer I Safety
Asst Engineer I Safety
Asst Engineer I Material
Asst Engineer I Safety
Asst Engineer I Estimator
Asst Engineer I Safety
Asst Engineer I Safety
Asst Engineer I Safety
Asst Engineer I Safety
Asst Engineer I Safety
Asst Engineer I Safety
Asst Engineer I CADD/As-Built
Asst Engineer II Material
Asst Engineer II Interface Coordinator
Asst Engineer II Data/Network
Asst Engineer II Field Technical Support
Asst Engineer II Business Administration/Contracts
Asst Engineer II Engineering Support
Asst Engineer II Engineering Support
Asst Engineer II Engineering Support
Asst Engineer II Engineering Support
Business Sys Analyst IV LAN Administrator
Const Mat Spec I Material
Const Mat Spec I Material
Const Mat Spec I Commissioning
Const Mat Spec I Material
Const Mat Spec I Material
Const Mat Spec I Materials Specialist
Const Mat Spec I Materials Specialist
Const Mat Spec I Materials Specialist
Const Mat Spec I Materials Specialist
Const Mat Spec I - Materials Material
Constr Engineer I Mechanical
Constr Engineer I Electrical
Constr Engineer I Electrical
Constr Engineer I Mechanical
Constr Engineer I Mechanical
Constr Engineer I Mechanical- Piping Structure
Constr Engineer I Electrical & Instrumentation
Constr Engineer I Marine Coordinator
Constr Engineer I Rotating
Constr Engineer I Rotating
Constr Engineer II Mechanical
Constr Engineer II Electrical
Constr Engineer II Communication
Constr Engineer III Process & Control
Constr Engineer III Electrical
Constr Engineer III Mechanical
Constr Engineer III Mechanical
Constr Engineer III Mechanical
Constr Engineer III Electrical
Constr Engineer III Mechanical- Piping Structure
Constr Engineer III Mechanical
Construction Analyst Safety
Construction Analyst Safety
Cost Engr I Costing/Forecasting
Cost Engr II Forecasting
Cost Engr II Forecasting
Cost Engr II Forecasting
Cost Engr II Costing/Forecasting
Cost Engr II Costing/Forecasting
Cost Engr III Forecasting
Cost Engr III Forecasting
Cost Engr III Forecasting
Cost Engr III Costing/Forecasting
Cost Engr III Costing/Forecasting
Cost Engr III Costing/Forecasting
Cost Engr IV Forecasting
Cost Engr IV (PCU) Forecasting
Engineer I Process & Control
Engineer I Electrical
Engineer I Safety
Engineer I Electrical
Engineer I Architectural
Engineer I Electrical
Engineer I Electrical
Engineer I Mechanical
Engineer I Safety
Engineer I Mechanical
Engineer I Civil / Architectural
Engineer I AV Sys Specialist
Engineer I Communication
Engineer I Mechanical/Rotating
Engineer I Civil
Engineer I Radio Frequency Identification (RFID)
Engineer I Electrical
Engineer I Civil/Structural
Engineer I Civil/Structural
Engineer I Electrical
Engineer I Mechanical
Engineer I Instrumentation
Engineer I Piping
Engineer II Instrumentation
Engineer II Safety
Engineer II Mechanical
Engineer II Safety
Engineer II Civil
Engineer II Architectural
Engineer II Mechanical
Engineer II Electrical
Engineer II Electrical
Engineer II Civil / Architectural
Engineer II Data/Network
Engineer II Mechanical
Engineer II Communication
Engineer II Electrical
Engineer II Mechanical
Engineer II Electrical
Engineer II Chemical
Engineer II Communication
Engineer II Mechanical
Engineer II Mechanical
Engineer II Mechanical
Engineer II Communication
Engineer II Electrical
Engineer II Mechanical
Engineer II Communication
Engineer II Mechanical/Piping
Engineer II Instrumentation
Engineer II Electrical
Engineer II Electrical
Engineer II Electrical
Engineer II Civil
Engineer II Mechanical (HVAC)
Engineer II Mechanical
Engineer II Electrical
Engineer II Mechanical
Engineer II Mechanical, Electrical, Plumping (MEP)
Engineer II Structural
Engineer II Telecom Engineer
Engineer II Electrical
Engineer II Civil/Structural
Engineer II Mech/Rotating Equipment
Engineer II Electrical
Engineer II Instrumentation
Engineer II Mech/Rotating Equipment
Engineer II Civil/Structural
Engineer II - Architect ( Landscape) Architectural
Engineer II - Architect ( Landscape) Architectural
Engineer II - Civil Engineer Civil
Engineer II - Communication (Fire Alarm “BMS”) Communication
Engineer II - Communication (Inside Plant) Communication
Engineer II - Elect/Instrumentation Electrical
Engineer III Electrical
Engineer III Electrical
Engineer III Mechanical
Engineer III Safety
Engineer III Communication
Engineer III MECHANICAL
Engineer III Mechanical
Engineer III Electrical
Engineer III Instrumentation
Engineer III Civil/Structural
Engineer III - Electrical Electrical
Engineer III - Mechanical Mechanical
Engineer III - Safety Safety
Engineer IV Electrical
Engineer IV Architectural
Engineer IV Civil/Structural
Engineer IV Mechanical
Engineer IV Mechanical
Engineering Aide Mechanical
Engineering Aide Civil
Engineering Aide Information Technology
Engineering Technician Instrumentation
Engineering Technician Instrumentation
Estimating Engr I Estimator
Estimating Engr I Estimator
Estimating Engr II Forecasting
Estimating Engr II Estimating
Estimating Engr III Estimating
Estimating Engr III Estimator
Estimating Engr IV Estimator
Estimating Engr IV Estimator
Proj Mat Spec Materials Specialist
Proj Mgmt Specialist Mechanical
Sched Engr I Scheduling
Sched Engr I Scheduling
Sched Engr I Scheduling
Sched Engr I Scheduling
Sched Engr II Scheduling
Sched Engr II Scheduling
Sched Engr II Scheduling
Sched Engr II Scheduling
Sched Engr II Scheduling
Sched Engr II Scheduling
Sched Engr II Scheduling
Sched Engr II - Scheduler Scheduling
Sched Engr III Scheduling
Sched Engr III Scheduling
Sched Engr III Scheduling
Sched Engr III Scheduling
Sched Engr IV (PCU) Scheduling
Sr Construction Spec Safety
Sr Construction Spec Safety
Sr Construction Spec Electrical
Sr Construction Spec - Communication/DCS (IGHD) Instrumentation
Technical Clk Engrg Engineering Support
Technical Clk Engrg Engineering Support

job well done bro Gardo for our fellow Filipinos who have the skills fitted for the job. I hope this will be circulated so that many of our compatriots will benefit from it.

Sayang di ako qualified sa Canada

_________________
....======="Dont fight with PIGS, you'll get dirty and they love it" =======....

bro, yong nai-post ko sa itaas ay tunay na galing sa mga kakilala ko noong nasa recruitment business pa ako sa manila at ngayon ay swerte sila na nandoon pa sa mga projects sa saudi aramco at yong isa sa calgary, canada na..... sana may mga paclanders na mag try nito baka sakali swertehin din sila

good luck folks!

Wala bang para sa Quality Engineer brod?

_________________

“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.”
― Albert Einstein

ok bro magkaintindihan tayong dalawa rito at nasa Quality din ako
anong QC jobs ang hanap mo bro? nasa construction ka ba? or sa manufacturing?
kong nasa construction ka, anong trade ka ba? civil, mechanical, E&I or even an archi?
sa field ka ba bro or sa office preparing all the QC procedures, inspection and test plan?

cge bro sabihin mo sa akin at icheck ko sa mga kaibigan ko

Is there a vacant prime minister job in Canada?

Mechanical ako bro... ngayon sa Construction Company ako, pero may more than 8 years experience din ako sa Manufacturing.

Nasa opisina ako bro... ako ang nag prepare ng mga Project Quality Plan, Project Specific Procedures, Inspection and Test Plans for tender transmittal etc.. Ako rin in-charge sa IMS Audits.

_________________

“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.”
― Albert Einstein

@bbimok:
nice job bro, hindi ka nagka mali sa pag pili nito, cge mag inquire ako sa mga kaibigan ko tungkol sa mga vacancies bro, kong may maitulong ako sa yo tungkol sa QC (any) pls feel free to PM me

Thanks bro.

_________________

“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.”
― Albert Einstein

actually bro i am with the City Planning & Development Office sa isang city dito sa Negros at sinabihan ko ang kilala kong engineer about this na me current application din sa Canada so i try nya daw apply dyan. I do trust you and recognize your effort to try to be of help para sa ating mga kababayan. It's a very heroic deed bro. keep it up!

Thanks!

There's an opening in Somalia.

_________________
----------

my mom and my sister (with her family) are in merritt bc

im thinking of migrating too.

benefits are way good

_________________
manny pacquiao ---> perpetual motion + precision + power